Refer to the exhibit. An engineer must set up connectivity between a campus aggregation layer and a branch office access layer. The engineer uses dynamic trunking protocol to establish this connection, however, management traffic on VLAN1 is not passing. Which action resolves the issue and allow communication for all configured VLANs?

SW2#
%CDP-4-NATIVE_VLAN_MISMATCH:NATIVE VLAN mismatch discovered on GigabitEthernet0/1(1),with SW1 GigabitEthernet 0/1(30).
SW2#

A. Allow all VLANs on the trunk links
B. Disable Spanning Tree for the native VLAN.
C. Configure the correct native VLAN on the remote interface
D. Change both interfaces to access ports.

Refer to the exhibit. An engineer must set up connectivity between a campus aggregation layer and a branch office access layer. The engineer uses dynamic trunking protocol to establish this connection, however, management traffic on VLAN1 is not passing. Which action resolves the issue and allow communication for all configured VLANs?

SW2#
%CDP-4-NATIVE_VLAN_MISMATCH:NATIVE VLAN mismatch discovered on GigabitEthernet0/1(1),with SW1 GigabitEthernet 0/1(30).
SW2#

A. Allow all VLANs on the trunk links
B. Disable Spanning Tree for the native VLAN.
C. Configure the correct native VLAN on the remote interface
D. Change both interfaces to access ports.

Correct Answer: C