CCNP 350-401 ENCOR Question 633 DISCUSSION

  • 2547 views
  • 2023-07-08
« Back to Main Menu

    Refer to the exhibit. An engineer must configure HSRP for VLAN 1000 on SW2. The secondary switch must immediately take over the role of active router If the interlink with the primary switch fails. Which command set completes this task?

    SW2(config)#track 1000 interface gigabitEthernet0/0 line-protocol
    SW2(config-track)#exit
    SW2(config)#interface vlan 1000
    SW2(config-if)#ip address 10.23.87.3 255.255.255.0

    A. 
    SW2(config-if)# standby version 2
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 preelept
    SW2(config-if)# standby 1000 track gigabitethernet0/0

    B. 
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 preempt
    SW2(config-if)# standby 1000 track 1000

    C. 
    SW2(config-if)# standby version 2
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 preempt
    SW2(config-if)# standby 1000 track 1000

    D. 
    SW2(config if)# standby version 2
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 track 1000

    « Previous Next »

    Refer to the exhibit. An engineer must configure HSRP for VLAN 1000 on SW2. The secondary switch must immediately take over the role of active router If the interlink with the primary switch fails. Which command set completes this task?

    SW2(config)#track 1000 interface gigabitEthernet0/0 line-protocol
    SW2(config-track)#exit
    SW2(config)#interface vlan 1000
    SW2(config-if)#ip address 10.23.87.3 255.255.255.0

    A. 
    SW2(config-if)# standby version 2
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 preelept
    SW2(config-if)# standby 1000 track gigabitethernet0/0

    B. 
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 preempt
    SW2(config-if)# standby 1000 track 1000

    C. 
    SW2(config-if)# standby version 2
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 preempt
    SW2(config-if)# standby 1000 track 1000

    D. 
    SW2(config if)# standby version 2
    SW2(config-if)# standby 1000 ip 10.23.87.1
    SW2(config-if)# standby 1000 priority 95
    SW2(config-if)# standby 1000 track 1000

    Correct Answer: C

    « Previous Next »

    Support AceITCert.com by buying stuff you need!

    0 Comments

    In order to participate in the comments you need to be logged-in.
    You can sign-up or login (it's free).