Refer to the exhibit. An engineer must configure an ERSPAN session with the remote end of the session 10.10.0.1. Which commands must be added to complete the configuration?

A. 
Device(config)# monitor session 1 type erspan-source
Device(config-mon-erspan-src)# destination
Device(config-mon-erspan-src-dst)#no origin ip address 10.10.0.1
Device(config-mon-erspan-src-dst)#ip address 10.10.0.1

B. 
Device(config)# monitor session 1 type erspan-destination
Device(config-mon-erspan-src)# source
Device(config-mon-erspan-src-dst)#origin ip address 10.1.0.1

C. 
Device(config)# monitor session 1 type erspan-source
Device(config-mon-erspan-src)# destination
Device(config-mon-erspan-src-dst)#no origin ip address 10.10.0.1
Device(config-mon-erspan-src-dst)#ip destination address 10.10.0.1

D. 
Device(config)# monitor session 1 type erspan-source
Device(config-mon-erspan-src)# destination
Device(config-mon-erspan-src-dst)#no vrf 1

Refer to the exhibit. An engineer must configure an ERSPAN session with the remote end of the session 10.10.0.1. Which commands must be added to complete the configuration?

A. 
Device(config)# monitor session 1 type erspan-source
Device(config-mon-erspan-src)# destination
Device(config-mon-erspan-src-dst)#no origin ip address 10.10.0.1
Device(config-mon-erspan-src-dst)#ip address 10.10.0.1

B. 
Device(config)# monitor session 1 type erspan-destination
Device(config-mon-erspan-src)# source
Device(config-mon-erspan-src-dst)#origin ip address 10.1.0.1

C. 
Device(config)# monitor session 1 type erspan-source
Device(config-mon-erspan-src)# destination
Device(config-mon-erspan-src-dst)#no origin ip address 10.10.0.1
Device(config-mon-erspan-src-dst)#ip destination address 10.10.0.1

D. 
Device(config)# monitor session 1 type erspan-source
Device(config-mon-erspan-src)# destination
Device(config-mon-erspan-src-dst)#no vrf 1

Correct Answer: A